Monday, June 27, 2011

caterpillar truck ct660

images Caterpillar CT660 caterpillar truck ct660. Cat#39;s JV with Navistar#39;s
  • Cat#39;s JV with Navistar#39;s


  • Berkeleybee
    04-03 04:36 PM
    brb2, Thanks for pointing it out. Actually the figure of 15% makes our case stronger. We will have it changed.

    Seeing as how I and Stuck labor were the ones to put that National Interest Fact sheet together thought I should respond:

    The NAS report is available at http://fermat.nap.edu/catalog/11463.html

    The document is quoting from page ES-8 of the NAS report -- I'm cutting and pasting from the document

    "In Germany, 36% of undergraduates receive their degrees in science and engineering. In China, the
    figure is 59%, and in Japan 66%. In the United States, the corresponding figure is 32%."

    The NAS document end note says "Based on data from Data are from National Science Board. 2004. Science and Engineering Indicators 2004 (NSB 04-01). Arlington, VA: National Science Foundation, Appendix Table 2-33."



    The document you have linked to says

    In South Korea, 38% of all undergraduates receive their degrees in natural science or engineering. In France, the figure is 47%, in China, 50%, and in Singapore 67%. In the United States, the corresponding figure is 15%.27 In South Korea, 38% of all undergraduates receive their degrees in natural science or engineering. In France, the figure is 47%, in China, 50%, and in Singapore 67%. In the United States, the corresponding figure is 15%.

    And the document footnote says
    Analysis conducted by the Association of American Universities. 2006. National Defense Education and Innovation Initiative. Based on data in National Science Board. 2004. Science and Engineering Indicators 2004 (NSB 04-01). Arlington, VA: National Science Foundation. Appendix Table 2-33. For countries with both short and long degrees, the ratios are calculated with both short and long degrees as the numerator.



    So this is pretty odd -- both are based on the same base dataset, and it looks like the second document calculates the % differently. Also not sure why one says "science and engineering" and the other says "natural science and engineering"




    wallpaper Cat#39;s JV with Navistar#39;s caterpillar truck ct660. Awsome truck I am preordering!
  • Awsome truck I am preordering!


  • stealthgt
    04-18 09:29 PM
    I'm in Miami




    caterpillar truck ct660. FABCO Equipment Inc.
  • FABCO Equipment Inc.


  • vikrantp
    12-23 01:35 PM
    Can I port a PD from Company A when the company got bankrupt and closed after I moved to Company B and started my new LC and I140.




    2011 Awsome truck I am preordering! caterpillar truck ct660. Cat Vocational Truck line will
  • Cat Vocational Truck line will


  • dalasengineer
    10-04 04:38 PM
    I was issued a license based on my EAD expiration date. Same for my wife. We went back to DMV to get license extended based on I 94 expiry date. My I94 expiry date was different than ED expiration date as the customs gave expiry date which is 1 year later than EAD expriation date. I asked the customs officer why the date was different than my EAD date. He told my stay was valid till my I94 expiry date.
    Anyways, IOWA DMV extended our license based on I94 date and we came back happy to know that we shall not have to walk in -30F to fetch our grocery as we wait to get our renewed EAD..

    regardss



    more...

    caterpillar truck ct660. 2011 caterpillar truck.
  • 2011 caterpillar truck.


  • prem_goel
    12-02 11:25 PM
    Just for updating everyone, I got my stamping done successfully at Tijuana. They give the passport next day as expected, so just make sure to make the arrangement for the night. It's pretty cool for H-1B people both for full-time plus contractors, albeit for contractors they sometimes will call/e-mail your employer to verify. It will usually happen in a day or two and they'll issue the visa then. Let me know if anyone wants any particular details on Tijuana/H-1B stamping there.




    caterpillar truck ct660. Cat CT11 ratings from 330 bhp
  • Cat CT11 ratings from 330 bhp


  • GCisLottery
    01-25 04:47 PM
    Please do not quote T(oilet paper) o(f) I(ndia)

    Seriously.



    more...

    caterpillar truck ct660. MAN trucks worked on the
  • MAN trucks worked on the


  • cool_guy_onnet1
    06-01 01:51 PM
    unfortunately anything that says/reads no cap on h1 will be shot down as soon as it takes off...
    Plus, H1B is debated and decided upon (pro-H1B's are quite happy as-is), EB has not been debated at all.




    2010 FABCO Equipment Inc. caterpillar truck ct660. Caterpillar CT660
  • Caterpillar CT660


  • eastindia
    08-20 12:06 PM
    Ron says, The USCIS teleconference concerning implementation of PL 111-230 provided the following information:

    * The effective date of the new law was August 14, 2010 and all petition submissions postmarked on or after that date are subject to the new tax.
    * The new tax only applies to companies that have:
    o 50 or more full and part time employees in the US; and
    o At least 50% of those employees hold H1B or L status.
    * If an employee has an EAD, but is working using an H1B, that employee counts toward the total. If the employee works using his or her EAD, however, the employee does not count.
    * The new tax only applies to new H filings (including change of employer filings)
    * The new tax DOES NOT apply to extensions or amendments
    * The total new tax is $2,000, not the higher amount originally feared
    * The CIS confirmed that the additional fee must be paid by the petitioner and not the employee
    * Both full and part time employees count toward the 50 employee threshold
    * Any L2 employees, working using an EAD, also count toward the total
    * The CIS is in the process of developing a new I-129 form to capture information concerning the new fee
    * The CSC and VSC are attempting to screen existing cases, with filing postmarks on or after August 14th. For those that are found likely to be subject to the new tax, they will issue RFEs
    * DO NOT send checks to the CIS for the additional fee until you receive an RFE.
    * New filings by exempt companies should include a signed attestation that they are not subject to the new tax.
    * Best practice, use a separate check for the new fee.



    more...

    caterpillar truck ct660. caterpillar truck ct660,
  • caterpillar truck ct660,


  • iamlost
    07-24 10:37 PM
    HI,

    Don't panic. USCIS rarely reopens an approved GC (only in cases of fraud or misrepresentation). If you are talking about the online status, I would not pay too much attention to it as it gives incorrect info sometimes.

    If you or your company did actually receive a RFE in the snail mail, get in touch with a good attorney and contact USCIS to see what is going on.

    Alternatively, you can contact USCIS customer service yourself, to put your mind at ease.

    Good luck.
    I am wondering if this has anything to do with the erroneous 140 approvals from TSC. So, they revised all the approvals to pending status ... and my 2.5 old approved case also got in midst of it ... Hmmm !!! This is killing man .... No peace even after GC !



    TSC Erroneously Issues I-140 Approval eMails on Premium Processing Cases
    �MurthyDotCom
    The Texas Service Center (TSC) advised in late July 2009 that eMail notifications have incorrectly been sent, which indicate approvals of Immigrant Petition for Alien Worker (I-140) cases. These eMails are originating from the Premium Processing Unit due to a technical problem. The system is issuing these eMails in error shortly after the transmission of the eMail receipt.
    �MurthyDotCom
    Erroneous I-140 Approval eMails do not have a Priority Date
    �MurthyDotCom
    The erroneous eMail does not contain a priority date or EB classification for the case. TSC is working to address the technical problem. Employers who are unsure about any such communication received from the TSC Premium Processing Unit can contact that unit at the eMail address or phone number provided on the I-140 receipt notice.
    �MurthyDotCom
    Conclusion
    �MurthyDotCom
    This likely is annoying and frustrating to individuals who believed their I-140 approvals were received in record time, only to find out that the approval eMail notification was erroneous. Although not specifically stated in the information released by TSC, it appears that this problem has been limited to eMail notifications. There was no indication that any hard-copy approval notices have been issued in error. MurthyDotCom and MurthyBulletin readers will be advised of any further information on this topic, when it is made available.




    hair Cat Vocational Truck line will caterpillar truck ct660. caterpillar diesel 3304
  • caterpillar diesel 3304


  • piyu7444
    05-08 07:15 PM
    What if your old employer cancels your I-140? In that case wouldn't it be better to have informed USCIS that you changed jobs?

    After 180 days if employer cancels I 140 it does not matter......:)



    more...

    caterpillar truck ct660. CATERPILLAR CT660 dump truck
  • CATERPILLAR CT660 dump truck


  • bbenhill
    09-18 02:56 PM
    Hi, I believe you can only use EAD and AC21 after I140 is approved and 180 days of filing I-485.

    Guru(s) : Please let me know if I am mistaken but by using EAD before above conditions will abandon GC application because labor certification is being violated.

    PS : I am not a lawyer/attorney. please use this information for your own risk.

    Thx




    hot 2011 caterpillar truck. caterpillar truck ct660. caterpillar trucks 797,
  • caterpillar trucks 797,


  • tcsonly
    07-21 04:07 PM
    My PD is June 04 and the online status for my LC shows CERTIFIED since last week. Attorneys say they need DOL to send them the approved LC ... some document, which would be needed to file I-140 and I-485. Any idea how much time it takes for DOL to send the above said document back to the applicant or representative?

    In that case, have your paper work ready such as medical tests, birth certs & related.

    -C.



    more...

    house get on a new Cat truck! caterpillar truck ct660. caterpillar trucks 797,
  • caterpillar trucks 797,


  • Templarian
    11-25 10:15 PM
    http://img260.imageshack.us/img260/1541/screeng.png
    Also, yea, I used the WoW font. Writing the WoW Armory app for the Palm Pre at the moment.




    tattoo Cat CT11 ratings from 330 bhp caterpillar truck ct660. CAT CT660 Pics released
  • CAT CT660 Pics released


  • sanjay02
    12-12 12:49 PM
    I have a dumb question, do they finger print you( similar to non-immigrant category) when you enter using AP?



    more...

    pictures MAN trucks worked on the caterpillar truck ct660. My Cat Truck » Curious About
  • My Cat Truck » Curious About


  • Pankaj
    08-18 04:59 PM
    If your wife's I-94, which she have received at the time of entering to USA on dependent visa was valid till the date of the starting new the job, she should be fine even if she has not started working on H1 after approval. She has maintained the H4 status during that period as per I-94.

    My wife here on H4 and she go H1 but she started job after a while as employer delayed. But her status was valid. Even she told the same to the US counselor New Delhi and she got h1 stamping done. Gap of H1 approval effective date and employment was about 2 months.

    If you would ask this question to any attorney, you may get same reply. But asking to attorney is advisable.




    dresses caterpillar trucks 797, caterpillar truck ct660. Caterpillar CT660 hanno
  • Caterpillar CT660 hanno


  • gc_kaavaali
    12-08 01:33 PM
    Hi guys,
    IV need contributions to invest in the omnibus bill Lobbying efforts.. for more details look at below thread...

    http://immigrationvoice.org/forum/showthread.php?t=15905



    more...

    makeup caterpillar truck ct660, caterpillar truck ct660. get on a new Cat truck!
  • get on a new Cat truck!


  • rakesh_uvce
    10-10 09:01 AM
    hi mpadapa,

    I couldnt find that question. Do you know aapprox what time after the conference call started or the name of the guy who posted that question?
    thanks




    girlfriend CAT CT660 Pics released caterpillar truck ct660. Freightliner Trucks has
  • Freightliner Trucks has


  • krishnam70
    06-18 11:40 AM
    Received RFE for primary applicant (myself) and spouse.
    Please submit evidence of lawful presence from October 1998 until August 17, 2007.
    The documents may include the following:
    A) a photo copy of form I-797 for all extensions and change of status
    B) photo copy of form I-20 or IAP66 school records (front and back) including all school annotations
    c) Photocopy (front and back) of applicant's Form I-94 Arrival/Departure Record

    Below is my immigration timeline

    CLASS ------ VALID FROM ------ VALID TO ------ Comments
    H1-B -------- 5/16/1995 -------- 5/17/1998
    H1-B -------- 5/17/1998 -------- 5/17/2001
    H1-B -------- 12/23/1999 ------- 6/30/2001
    H1-B -------- 7/1/2001 --------- 9/30/2001
    0-1 --------- 10/3/2001 ------ 10/1/2004 ------ Stamped in Chennai
    EAD --------- 8/4/2004 -------- 8/3/2005 ------- EB1 denied 1/15/2005
    0-1 --------- 5/13/2005 ------- 5/12/2008 ------ Stamped in Chennai
    0-1 --------- 4/3/2007 --------- 3/13/2010
    0-1 ---------- 5/2/2207 --------- 5/12/2009

    After 1/15/05 (EB-1 denial)
    - Left the country on 6/15/05 (less than 6 months)
    - During this time, applied for O-1 visa and got approved
    - Got visa stamping in Chennai with O-1 visa
    Do you see any issues with my response ?

    1. Your Evidence of legal stay can be gathered from the stamps in passport
    2. Take copy of each page of your passport and write a letter with each entry and exit date and the category in which you were admitted in to the country.

    3. O-visa is dual intent.
    http://www.greencardlawyers.com/workvisas/O-1visa.html

    4. Even if they harp upon your stay of 6 months without a status, it should be wiped clean once you were admitted back in to the country. I think there is a precedent and law for this. cannot recall it right now.

    5. I think they are looking for information from your side and the burden of proof is on you to prove that you have been in legal status. Provide all the documentation and sit back. In case of any issues attorney's are there to handle it...

    - good luck




    hairstyles CATERPILLAR CT660 dump truck caterpillar truck ct660. The new Caterpillar CT 660
  • The new Caterpillar CT 660


  • pitha
    07-08 03:11 PM
    I was one of the people who bashed Oh when he "sympathizes" with USCIS workers, I could not figure out what he was thinking sympathizing with USCIS workers.

    In this case he is helping publicize the flower campaign. Why are you guys bashing him instead of thanking him? IV core has clearly stated the flower campaign and some other initiatives are member initiatives and not IV initiatives so I can understand why Mathew Oh might have left out IV. Let�s not make an enemy out of a friend who is trying to help us in this particular situation.




    tonyHK12
    11-30 09:14 PM
    We need to get all these businesses to join together with Immigration voice and support us by lobbying and funding.
    No Great H-1b will come here if its going to take 10-20 years to get a Green card.
    I would suggest, lets have another action item to write to these companies about IV and ask for their help for Legal Immigrants that everyone needs.
    This is a big thing that is missing so far.
    See how the president of the Agricultural board, unions appear on TV asking for support for illegals and also get invited to Congress.




    gc_check
    01-08 10:22 AM
    I got it in a week, I got it from SF Consulate.

    This might be a simple stupid question,

    Can you please update, if you used a standard 2*2 passport taken here in the applicaiton form or got one 3.5 cm * 3.5 cm as put in the passport form. If yes, where did you took one. The standard size Passport Photo appears to be a little bigger than the one specified in the Passport application.



    No comments:

    Post a Comment